Jumat, 04 Maret 2016

HYC Cruise Day 6 July 30 Lay Day in Block Island

,
Blasts crew rented a car to tour the Island, by day, dined at the National on a gift certificate and reported that it was excellent.

True North remained aboard during the day to make sure their anchor was holding in the big winds and came in for dinner at The Oar. 

Everyone from Ohana and ILENE (except Ilene) rented bikes from Aldos at the Boat Basin for the big loop of the southern half of the island. First major stop was at the beach at the foot of Mohegan Bluffs. 

There the younger generation went for a swim while Bennett and Roger took a long walk west along the beach. I dont think I have ever been there at low tide before. It reveals where one can swim without fear of being crushed against submerged rocks by the breakers. Then a brief stop at the lighthouse for liquid refreshments as defense against dehydration. There we learned of the imminent plan to build a "U" shaped cup of windmill generators around the southern end of the island a mile or two off shore. We had lunch at Finns, where Bennett satisfied his craving for whole fried clams and Roger ordered this new (for me) treat too. Then marketing at the very pricey local market before returning the bikes -- 1.5 hours late for a half day (4 hour) rental but they did not charge us the extra ten bucks -- and we dinked back, except for Rolo and Chris, who went to the beach and returned by launch later

Dinner on ILENE for eight: from Ohana, ILENE and Shanghai. A weird assortment of foods that somehow came together magically.  A rain shower required us to migrate from the cockpit to the cabin. CJ enthralled us with stories from his interesting life. We eight were from China, the U.S., Guatemala and Denmark, and included speakers of about ten different languages.  Most of our dinner table pics are after the meal; eating seems to always take precedence over photography until plates are empty.
Rolo, Christian, Laura and Bennett

Jenny, CJ, Lene and Roger
Shanghais dink motor failed on the way over so they came in tow. And I towed them back. Maybe we can create one fully operative dink between Shanghais inflatable and Ohanas outboard. But, in fact, it appears that all of the places both boats intend to visit on their ways back -- yes we are at our furthest point away from City Island -- have either docks or launch service. The other alternatives are the blissful solitude of staying aboard a well provisioned boat or getting a lift from strangers.

Stay tuned.
Read more

March 30 April 2 Fort Pierce to Cocoa and Three Lay Days There 57 Miles

,
We left the fuel dock at 8 am and anchored at 4:45. Lots of miles but all high bridges except one which opened on request. We went past Vero Beach and Dragon Point, where we had stayed on our way south. This was just as pleasant a passage as the one to Fort Pierce had been ugly. The ICW is deeper, wider and straighter for the most part, and it was sunny and warmer.
A pod of porpoises looked us over while crossing close behind us; we havent seen them for a while. When the tide turned, slowing us from near seven knots to 6.2, the wind came up, just far enough off our starboard bow to allow the small jib to get that speed back for us. We had planned to go outside in the Atlantic to New Smyrna, but the problem with the sunken barge in the Fort Pierce Inlet coupled with winds out of the north made the decision to stay inside until New Smyrna for us -- three passages instead of one.

In the morning the tachometer was not working, nor the engine hour meter. I took off and cleaned the plexiglass cover that protects the panel and the panel itself and jiggled the wires. Jiggling sometimes helps such problems, but no luck today. Then Lene said she had trouble with the ignition switch when turning on the engine. Oh yes, she had accidentally turned it to "Off". After "Start" it should be left "On", but turning it "Off" does not stop the engine -- it only turns off the electricity to its instruments. Switched back to "On" and the tachometer was instantly restored to operation.

A big pleasant surprise when I heard a yell of  "Roger" and saw a dark blue motorized catamaran passing us.
"Its Phat Cat," came next. Dave and Diane, with their two cats aboard, passed us. They resigned from the Harlem and are currently on their last leg (northbound up the Atlantic coast) of the "Great Circle Cruise". They started up the Hudson, and then through canals to the Great Lakes and Canada, down Lake Michigan, the Mississippi, Ohio, Tennessee and other rivers to the Gulf of Mexico, through the ICW east and south along Floridas west coast to Marathon and then northbound in the Atlantic.  This is a trip for power boats; our mast would have to be taken down for the trip, and laid atop the boat, would extend ILENE from 43 feet long to over 65. Dave and Di have been on the journey for about ten months. Since Marathon, they have been in many of the same places we were, but neither of us knew it and we had not met up until now. Their boats name is not on the boat and I might not have recognized it if they had not called out.

We recalled a wild Harlem Memorial Day Rendezvous near Ellis Island in NY Harbor. We had rafted up to Phat Cat and then another smaller sailboat rafted up to our other side and get her mast caught under our back stay. Several men got on top of Phat Cats roof and pulled down to the side on the other boats main halyard to free her. And again, during a Club Cruise, we enjoyed a good time with Dave and Di in Watch Hill, RI.











Phat Cat is a Lagoon 43, built in France, the same length as ILENE but twice as wide, so they have lots of room. It can be rigged with a mast and sails but Phat Cat is not.
The aft stateroom can be divided by a bulkhead down the middle to make two large staterooms if it is used for chartering; but Phat Cat has one immense stateroom, shown here with one of its two cats, Xena or Cassie, reclining on the queen size bed.  She goes faster than us and when we caught up we anchored near her at Cocoa Village, off to the west of the ICW in ten feet of water with 50 feet of snubbed chain.

Dave put down their dink and ferried us around the first night and the next two days that they stayed with us here, before moving on. We had not planned to stay here so long but the nearest place that can do a professional patch on our dink is in St. Augustine and they will not have time to do our job until April 7, so we have slowed down our itinerary to arrive there when they can do the work which will take two days.

We dined on Thai food with Dave and Di at Thai Thai our first night, a pot luck aboard their large boat the second and blueberry pancakes on ILENE the morning of their departure.
Lene making herself at home on Phat Cats back porch.
Dining room with nav station in background

Dave and I dinked across the Indian River to its eastern side where it was a short walk to the local Publix, less than half a mile. The four of us "shopped" Cocoa Village, right by our free dinghy dock, one afternoon. Lene got two pairs of shoes, Dave and Di enjoyed some excellent pastries from the bakery, and we toured Travis hardware, a famous old fashioned place with a huge inventory including tools for use on ocean liners. We bought a better lock to secure the dink to the shore or to the boat,   We are not far from Cape Canaveral where Disney Cruise ships put in with their thousands of passengers. One of the excursions is to take busloads of tourists to Cocoa Village for shopping.

When Dave and Di headed north, we took our dink across to Merrit Island so Lene could get her fix of supermarket shopping. I went back to Travis for a stainless steel snubber hook to replace the rusty mess that we had aboard, and "spline" rubber to affix the new cat proof screening into the frames of the side screens which had been scratched through. I also visited the bank and the Florida Historical society.

They have a good free dinghy dock at Cocoa Village, where one can tie up fore and aft to keep the dink away from the pilings and use the lock amidships to avoid theft. And you can see the shortened tiller extender sticking up, imagine before I cu 18 inches from it!
Lene got a message, her first on this trip, and after dinner at Murdocks,
(southern cuisine --  delicious and inexpensive) we attended the local production of My Fair Lady at the Cocoa Village Historic Playhouse.






And what a treat! The house holds 600. Eliza Doolittle was a sixteen year old. The actors were great and in the choral numbers 48 of them were on stage, supported by an orchestra of sixteen musicians. The costumes and sets were excellent and one would have paid five times as much to see this show on Broadway. Professor Higgins is such a misogynist and yet even today the story is great because the show makes fun of him for it.
Read more

October 18 Cambridge to Solomons Island 34 miles

,
Underway from 8:45 to 3:15 today.   Would have left a bit earlier but I left my cell phone at Johns house and he had to deliver it to us.  Thanks again John!

After motoring out of the inner harbor the still was supplanted by breeze which built during our passage. It soon became apparent that single reefed main and small jib were enough. The Choptank River has several ninety degree bends which permitted us to beat our way out of the river, but slowly. Once out in the Bay we turned increasingly to port, onto more southerly courses which put the wind closer to the beam and eventually, slightly aft of the beam. With those two small sails we hit speeds of 8 knots and averaged about 7.5  for several hours until we had to turn increasingly to the west again, to enter the Patuxent River, which features Solomons Island (no longer an island due to landfill at the upstream end) close to its mouth, on its northern shore.

We put in here twice before -- in 2006 and 2012. The first time we stayed at a marina and explored the town and its restaurants, supermarket, and museum. Solomons is very popular with boaters and has more than ten Marinas on Back Creek (it  runs in BACK of the town?). This time we motored about a mile up Mill Creek, slightly to the east. which is one of the several creeks that branch out from the harbor. We anchored in Old House Cove, off of Mill Creek, in 9 feet of water with 40 feet of snubbed chain out. NOAA predicted a continuation of todays NW winds at 15 knots tonight so we anchored in the lee of relatively high ground. Our newly found friend, Active Captain, sort of like a "Yelp" for boaters, reports this is a nice sheltered place with good holding and we agree. It is inaccessible to the hotels, restaurants, shops and other tourist attractions of this area but that is alright by us. We did not even lower the dink. We have each other, food, books and work to do. We were about 50 yards closer to the boathouse on our bow, this view upstream in the cove. No company tonight.

The Cove is bucolic; foliage just starting to turn here

Looking out from the Cove to the Mill River. Lots of room here.
Read more

April 30 May 1 Two Lay Days in Portsmouth Zero Miles

,
Lenes finger, at the right, is pointing out our slip on F Dock at this Marina, a huge one. In 2012 and 2014 we stayed at a free dock by the Radisson hotel, a couple hundred yards to the upper left of the poster but this time we wanted repairs and might have had to haul the boat so a marina was needed.

Gaston showed up with his assistant promptly as scheduled. I had cleared out the aft cabin to give access to the area of concern. He laid a pencil on the shaft, so light that it would easily detect vibration. Nothing. It does not happen at the dock, even when, tied onto it tightly, we run the engine in gear up to 2500 rpms, trying to drag the dock. He dissembled the flexible coupling again, tested for alignment with feeler gauges, reassembled it and pronounced that it was within tolerance. So the problem is outside the boat, at or near the propeller end of the shaft. He suggested that we wait until the fall and when the boat is hauled, we check the cutlass bearing and remove the propeller and ship it to California for what will be an expensive reconditioning job. He said that we are not in danger from the current situation.
Then he lent us his truck and we visited the supermarket, the drugstore, and a law firm where I signed a document and got it notarized. I spent a few hours planning the places we could stop along the Potomac on the way up and down to Washington DC. It is slim pickins for anchorages and marinas with water deep enough for ILENEs 58" draft. I have asked the 6500 members of a "private group" on Facebook for more information.
Later Gaston came over and paid us a social visit. He was born in France, raised in Israel and is an excellent mechanic. He was affiliated with and sailed in the Caribbean 1500.

The weather has been rainy most of our two days here and so we did little. I had visited the nautical museum and lightship in 2012 and toured the historic district. It rained then too!
They also have a Childrens Museum and one honoring Virginia athletes. I took a pass on those. There is a small Jewish Museum and a historic 1812 house, both of which can be toured, but only in season, not now.
So we took showers, took on water, cleaned the boat, blogged, read, cooked, ate and watched the first two episodes of the PBS series Wolf Hall, based on a novel by Hillary Mantell, which my book group read a few summers ago, about Thomas Cromwell, an attorney in the time of Henry VIII.

We would have left the second of these two days but the forecast of rain and 25 knot wind in our faces deterred us and the forecast came true.
Read more

Geezer Racing The Gentlemans Way

,
The formula:
  1. Get a small two-man dinghy with, and this is important, NO SPINNAKER!
  2. Make sure the wind is light so NO HIKING! (Well, maybe some leaning out is OK.)
  3. Assign one geezer as PORT helmsman and the other as STARBOARD helmsman which eliminates any one person actually crossing the entire boat on tacks
  4. Enjoy whatever the competition brings!




Read more

Kamis, 03 Maret 2016

February 11 14 Key West to Marathon and Three Lay Days There 42 4 Miles

,
We took in our dock lines at 7:30 and were anchored in Marathon at 3:30, sailing all but the first five and last fifteen minutes of outing and ining. The winds were forecast from the north at ten knots which meant no big waves, because they have to build up from south of the Keys. The wind did come from there eventually, and nicely, with a steady fifteen knots; we were making near eight knots at the end.
We had full sails up throughout, but the early part of the passage was troubling. The wind had too much of an easterly component so we were close hauled on port tack and I was envisioning the point where we would have to tack to avoid the shoals at the south side of Hawk Channel. And relative wind varied frequently by 25 degrees and between eight and fifteen knots requiring very frequent trimming of sails and course changes to get what speed we could make out of the wind and avoid the tack if possible. But no tack was needed in the end.
We were passed by s/v Liberty, which had been docked near us in the Key West Bight Marina. I hailed her to thank her for passing us on the gentlemanly leeward side. We avoided motoring, though it meant some 2.5 knot stretches. I find that once I switch on the "iron genoa" to assist us, it stays on far too long, its noise degrading the pleasure.
We communicated with s/v Autumn Born and they were arriving in Marathon too, but from the east. We saw them anchored outside the harbor to the west of the island, where it was rolly, and AB weighs twice ILENE. AB is in the safest possible place: with lots of room around her to let out 100 feet of chain in ten feet of water, as compared to the small crowded but more protected anchorage area inside. We dropped three times before we found the right spot, and have 60 feet of snubbed chain out in 12 feet of water. Good holding, tested by winds over 20 knots the third night.
In the channel we passed s/v Liberty again, somewhat stuck in the sand south of the channel. I said I would come out by dink to help once we were anchored but she broke herself free less than a minute later and followed us in. We were hailed by the crew of s/v Saint Somewhere, who we had tried to help up in Titusville, and later by Dean and Susan of Autumn Born, who were dinking in to register and get on the waiting list for a mooring. The winds have been so constantly from the north that people waiting for a window to hop over to the Bahamas are still waiting and not leaving.
Dean and Susan stopped by for wine and cheese on their way back to their boat. I love talking with Dean and save up my questions for him because he is so knowledgeable. I was pleased to able to give back a bit by showing him our experiences in the Marquesas Keys and Boca Grande Key. They will be going to Key West soon to meet family, and plan to take a mooring up in rolly Garrison Bight.We did not go to shore to register until the next day because that first night we had no need for anything the shore had to offer, and we also saved one nights dinghy docking fee, almost $18. The waiting list for a mooring is now longer than when we were here last month so there was no need to go ashore to get ourselves on the list because we will be leaving before anything becomes available. We had the last of our paella, watched Downton Abbey and called it a night.
We had a dinner with Dean and Susan and two other couples at Burdines, a very casual restaurant above the fuel dock the next night. Ilene invited herself and me and they had a table for eight.
Next morning I cleared all the "stuff" from the aft cabin to our bed in the forward one to provide space for work. I topped up the seven batteries with distilled water and prepared for the arrival of Alex
The line above Alexs head is how we keep the door
of our aft head, the cats head, open and stable, so it does not
flail and break itself from its hinges as the boat moves.
who installed and tested the "combiner" which will charge the starting battery automatically, whenever we are making electricity, but disconnect it from the house bank whenever we are not.
During the 9:00 am net on Channel 68 we announced our arrival and so did Tex and Maria of m/v "Heaven Sent", their 46 foot Grand Banks trawler on which they live. They belong to the Harlem and the Huguenot YCs, Tex is a Past Commodore of the Harlem. I later asked if anyone could lend me a set of feeler gauges to check the alignment of the flexible coupling that I had to install and Justin, of s/v "Selkey", from Cork, Ireland, responded and brought the tool over later and explained to me how to use it. Lene went ashore and did some shopping in the supermarket, while I set to work on the flexible coupling.

It is an ingenious device, attached by four forward facing bolts to the flange at the aft end of the transmission, and attached by four more bolts facing aft to the flange at the forward end of the propeller shaft.
It has two metal bars, one visible in the photo, that will hold it together if it shatters, so the shaft wont slide out of the hole in the boat through which the shaft rotates if the coupling shatters. But its purpose is to shatter if you hit something hard. By shattering it is supposed to prevent your transmission from shattering.
The first thing I noticed was that the new bolts installed in the old coupling by Deatons Yard in North Carolina were smaller in diameter than those that came with the new sealed unit from the factory. This is not good.
Well at least the spacing of the holes from each other through the flanges matched the spacing of those holes in the new unit. Hooray! And the new larger diameter bolts fit through the holes in the flanges. Hooray!  But this means that since North Carolina, we have been motoring with smaller diameter bolts in larger diameter holes, which is never a good thing and may have been the cause of the vibration, or contributed to it. But the new bolts were fractionally longer than the old ones so that when I got them installed they rubbed against the transmission housing. This was very bad; its just not going to work. What to do? Washers on the bolt head aft end of those bolts would place them far enough away I thought, so I took the whole thing apart again. But the washers were larger in diameter than the nuts, preventing my wrench from gripping the nuts to tighten them. What to do? Alex was doing his thing for us and suggested that I could bring my 17mm wrench in to his shop next morning and grind down the sides of the wrench, and narrow them so it would fit. But during the night I thought of two alternative solutions: (1) use smaller diameter washers, or (2) grind down the ends of the four bolts. Time for another consultation with Dean. Grinding the bolts was selected and Alexs electric grindstone made quick work of it. I put it all together again for the third time (it does not permit the removal of parts without complete dis-assembly, because there is just not enough room to get the bolts out). Having tested with the feeler gauge, it looked right and we turned on the engine and put it in gear, briefly. Im hoping the problem is solved. Time will tell when we use the engine to propel us for real.

One evening, we dinked over to Heaven Sent, (sorry for the fuzzy piture of this beautiful roomy boat). It was
 a long 1.5 mile dinghy ride, to the far eastern end of the harbor where Heaven Sent is tied up to the seawall.


The adjacent boat was s/v Liberty, which, we learned, is being single handed by a lady from St. Augustine.
I have known Tex and Maria since 1990 when I joined the Harlem. We had some wine before walking to a local restaurant, Dockside Tropical Cafe, one of several here that has live music. But every table was filled except one picnic table outside -- close enough to hear but not see the music. We ordered but later cancelled the order because the wait would have been at least an hour and it was cold out. Back at Heaven Sent, Maria cooked up a very fine dinner and we did not get back to ILENE until after ten pm, late for us.
Next day was a Family Fun Fest at the adjacent City Park. Lene had volunteered us to help the kids make projects with materials and tools donated by Home Depot, but when we got there they had too many volunteers and we were released. A wide variety of things for kids to do.
Our final dinner was at Lazy Days, just past Burdines, the nicest restaurant we visited in Marathon. Valentines Day, hence a rose for every lady. We had the pleasure of introducing Tex and Maria from our Club to Dean and Susan and Earl and Cathy, of s/v Seeker, who we had been introduced to by Dean and Susan in St. Augustine. Maybe Dean and Susan were starting to think that we had no friends other than those they introduced us to.
Susan, Kathy, Earl, Lene, Me, Maria and Tex (Photo credit to Dean)
Read more

The need of keeping water out of the bilge of a metal boat

,
I always start my surveys on metal boats by using Thermal Imaging of the hull. This helps me locate the structural components of the metal boat. I am also looking for trapped moisture and/or water. If this is found, then there is a good chance there will be corrosion. Next I conduct an inspection of the bilge of the boat, including, anchor, sail, cockpit lockers, and lazarettes. Now I have a very good idea where to concentrate my UTM-audio gauge. I take readings of the whole hull, but will do more readings in the areas of concern.

When I see water in a bilge of a metal boat beyond what might be in a sump I get concerned. I would like to see dry bilges on all metal boats, but this is not always possible. On Tuesday I surveyed a steel trawler. Overall this boat looked to be in fair condition, but then I saw the water in the bilge, a lot of it! There was heavy scale in some areas because of the standing water.  I knew this was an area I needed to spend some time getting thickness readings.

The next day I did my audio gauge. My readings indicated plate wastage. In some areas I could not get a reading that most likely is caused by heavy scale. My visual inspection from inside confirmed the heavy scale. When I arrived at the boat I noticed some weeping from what I hoped was paint blisters. Then an hour later water stared streaming from one of the blisters. Just to think only the paint was holding this section of plate together.

The good news! The boat was out of the water it will not sink. Steel boats can fixed; by cropping out the bad plate and adding new. In a short period of time, she will be underway again.

The moral of this story? If you own a metal boat keep an eye on the bilges.

I will post photos in my next post.
Read more
 

The Boat Plan Copyright © 2016 -- Powered by Blogger